SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 1744
Valve Spring Compressor
GENERAL
The valve spring compressor is used for clamping of valve springs when replacing the valve stem
seals with mounted cylinder head. The valve spring compressor is suitable for DOHC engines with
spark plugs between the camshafts. Includes 3 different bushings and 3 pressure elements.
Therefore the set fits on most cylinder heads.
IMPORTANT
•
These instructions are provided as a guide only.
•
Always refer to the vehicle manufacturer's service instructions, or a proprietary manual, to
establish the current procedure and data, also any warnings or cautions particular to the vehicle.
•
DO NOT use the set if any parts are missing or damaged.
•
DO NOT use this tool for any purpose other than that for which it is designed.
•
Never lay tools on the vehicle's battery. This may short the terminals together.
•
Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.
•
Keep children and other unauthorised persons away from the working area.
•
Be careful when working on hot engines!
•
Beware: Danger of burn by hot manifolds or other components!
•
Assure the vehicle against unintended starting, before applying the tool.
