BG CARDIO Elite UB, Owner'S Manual

Page: 25 / 30

20
www.3GCardio.com
CARDIO
3G
®
3G
CARDIO
®
Maintenance of your 3G Cardio Bike
WARNING: Always unplug your 3G Cardio Bike prior to cleaning and servicing to avoid electrical
hazard or shock.
Always wipe down your exercise bike after a workout. Sweat and perspiration is very corrosive to metal and
electronics and a good cleaning after a workout will keep your bike from potential long term damage. Never use
unapproved chemicals and solvents to clean your bike.
A protective coating has been applied to the electronics display and only cleaning solutions meant for
electronics should be used. This type of cleaner can easily be found online or at your local hardware store
and is the same type of cleaner used on flat screen TVs and computers. If you ever have questions about the
cleaning and care of your 3G Cardio product, call us at 888-888-7985 or by email at Support@3GCardio.com.
Before each use, it is very important to check the bike for loose bolts, knobs, levers or screws and if found,
resolve before performing any exercise. If you hear, feel or notice any type of sound, scraping, clunking or
grinding, contact an authorized 3G Cardio service technician or call us directly at 888-888-7985. We will help
to resolve the problem.
It will be important to do this asap as a small problem can turn into a bigger problem if left unresolved. It is also
important to resolve any issues to prevent a potential safety issue.
After the initial 10-12 hours of use, please check and tighten the crank arm bolts (bolts that attach pedals to
crank arms). These bolts must be tightened very securely upon initial assembly and if not tightened securely,
very likely may loosen and create an issue with the internal bearings inside the pedals. If not securely tightened
and a service issue develops, this may not be covered under the manufacturer’s warranty.
If you have any questions about assembly, service or about the bike in general,
please call us at 888-888-7985.
PLEASE READ! POTENTIAL SERVICE ISSUE!
1. Pedals must be tightened very tight to crank arm.
Failure to do so will result in pedal bearing failure!
2. Use correct size tool to avoid stripping bolts!
WARNING