- Non utilizzare l’automatismo se necessita di interventi di riparazione. In caso
di guasto o di malfunzionamento dell’automazione, togliere l’alimentazione di
rete sull’automazione, astenersi da qualsiasi tentativo di riparazione o intervento
diretto e rivolgersi solo a personale qualificato ed esperto (installatore profes-
sionale) per la necessaria riparazione o manutenzione. Per consentire l’accesso,
attivare lo sblocco di emergenza (se presente).
- Per qualsiasi intervento diretto sull’automazione o sull’impianto non previsto
dal presente manuale, avvalersi di personale qualificato ed esperto (installatore
professionale).
- Con frequenza almeno annuale far verificare l’integrità e il corretto funzionamento
dell’automazione da personale qualificato ed esperto (installatore professionale),
in particolare di tutti i dispositivi di sicurezza.
- Gli interventi d’installazione, manutenzione e riparazione devono essere docu-
mentati e la relativa documentazione tenuta a disposizione dell’utilizzatore.
- Il mancato rispetto di quanto sopra può creare situazioni di pericolo.
Tutto quello che non è espressamente previsto nel manuale d’uso, non è
permesso. ll buon funzionamento dell’operatore è garantito solo se ven-
gono rispettate le prescrizioni riportate in questo manuale. La Ditta non
risponde dei danni causati dall’inosservanza delle indicazioni riportate in
questo manuale.
Lasciando inalterate le caratteristiche essenziali del prodotto, la Ditta si
riserva di apportare in qualunque momento le modifiche che essa ritiene con-
venienti per migliorare tecnicamente, costruttivamente e commercialmente
il prodotto, senza impegnarsi ad aggiornare la presente pubblicazione.
USER WARNINGS (GB)
WARNING! Important safety instructions. Carefully read and comply with
the Warnings and Instructions that come with the product as improper use
can cause injury to people and animals and damage to property. Keep the
instructions for future reference and hand them on to any new users.
This product is meant to be used only for the purpose for which it was expli-
citly installed. Any other use constitutes improper use and, consequently,
is hazardous. The manufacturer cannot be held liable for any damage as a
result of improper, incorrect or unreasonable use.
GENERAL SAFETY
Thank you for choosing this product. The Firm is confident that its performance
will meet your operating needs.
This product meets recognized technical standards and complies with safety provisions
when installed correctly by qualified, expert personnel (professional installer).
If installed and used correctly, the automated system will meet operating safety
standards. Nonetheless, it is advisable to observe certain rules of behaviour so
that accidental problems can be avoided:
- Keep adults, children and property out of range of the automated system,
especially while it is moving.
- Do not allow children to play or stand within range of the automated system.
- This automated system is not meant for use by children or by people with impai-
red mental, physical or sensory capacities, or people who do not have suitable
knowledge, unless a person who is responsible for their safety provides them
with necessary supervision or instructions on how to use the device.
- Children must be supervised to ensure they do not play with the device. Do not
allow children to play with the fixed controls. Keep remote controls out of reach
of children.
- Do not work near hinges or moving mechanical parts.
- Do not hinder the leaf’s movement and do not attempt to open the door manually
unless the actuator has been released with the relevant release knob.
- Keep out of range of the motorized door or gate while they are moving.
- Keep remote controls or other control devices out of reach of children in order
to avoid the automated system being operated inadvertently.
- The manual release’s activation could result in uncontrolled door movements if
there are mechanical faults or loss of balance.
- When using roller shutter openers: keep an eye on the roller shutter while it is
moving and keep people away until it has closed completely. Exercise care when
activating the release, if such a device is fitted, as an open shutter could drop
quickly in the event of wear or breakage.
- The breakage or wear of any mechanical parts of the door (operated part), such
as cables, springs, supports, hinges, guides…, may generate a hazard. Have the
system checked by qualified, expert personnel (professional installer) at regular
intervals according to the instructions issued by the installer or manufacturer
of the door.
- When cleaning the outside, always cut off mains power.
- Keep the photocells’ optics and illuminating indicator devices clean. Check that
no branches or shrubs interfere with the safety devices.
- Do not use the automated system if it is in need of repair. In the event the auto-
mated system breaks down or malfunctions, cut off mains power to the system;
do not attempt to repair or perform any other work to rectify the fault yourself
and instead call in qualified, expert personnel (professional installer) to perform
the necessary repairs or maintenance. To allow access, activate the emergency
release (where fitted).
- If any part of the automated system requires direct work of any kind that is
not contemplated herein, employ the services of qualified, expert personnel
(professional installer).
- At least once a year, have the automated system, and especially all safety devices,
checked by qualified, expert personnel (professional installer) to make sure that
it is undamaged and working properly.
- A record must be made of any installation, maintenance and repair work and
the relevant documentation kept and made available to the user on request.
- Failure to comply with the above may result in hazardous situations.
Anything that is not explicitly provided for in the user guide is not allowed.
The operator’s proper operation can only be guaranteed if the instructions
given herein are complied with. The Firm shall not be answerable for damage
caused by failure to comply with the instructions featured herein.
While we will not alter the product’s essential features, the Firm reserves the
right, at any time, to make those changes deemed opportune to improve
the product from a technical, design or commercial point of view, and will
not be required to update this publication accordingly.
18 -
SUB BT
D811781 00100_03
Summary of Contents for SUB BT
Page 9: ......
