BFT ESPAS 20 T, Installation And User Manual

Page: 28 / 60

espas20 T - User manual rel. 5-2012 PAG. 28
The espas20 car park system has been designed and constructed to provide many
years’ operations provided the few required maintenance operations are carried out
punctually and carefully.
We recommend you keep the printer unit as clean as possible as this is a delicate point
of the printer. Follow the indications and plan weekly maintenance operations.
1 - Open the upper cover of espas20 T
2 – Open the upper door of the printer
3 - Remove the paper
4 – Remove any pieces of paper using oil-free
compressed air
5 – gently clean the printer head with a wet cloth
soaked with alcohol (indicated in figure with letter A)
6 – Close the door and refill with paper
ATTENTION! Disconnect the station before
cleaning the printer unit
To remove a jammed ticket:
- Open the side door
- Remove any remaining shreds inside the gears
- Open gently the printer cover and remove any remaining shreds
- Close the cover and refill with paper
Clean espas20 T only with water and a small amount of mild detergent.
9 - CLEANING AND MAINTENANCE
STATUS
NEA
R P
APE
R
END
FF
A
ENGLISH
9.1 - Cleaning and maintenance
9.2 - Removing a jammed ticket
9.3 - External cleaning
8.1 - Ticket CUSTOM Menu
READ FUNC PRINT READ FUNC PRINT READ FUNC PRINT
CUSTOM TICKET 1:
HOURS
CUSTOM ticket 1:
002 HOURS
SET AMOUNT:
5.00
Press PRINT (UP) and FUNC
(DOWN) to select between the
options:
- Not active
- Daily basis
- Per hour
If you choose “Not active” the
permit will not be displayed
either on the operator’s menu
or on the report “PRINT TARIF
DETAILS”
Press PRINT (UP)
and FUNC (DOWN) to
increase or decrease
the number of hours (or
days) of validity of the
permit:
(maximum value: 99)
Press PRINT (UP) and
FUNC (DOWN) increase
or decrease the amount
of CUSTOM permit
selling which is being
configured.
READ FUNC PRINT READ FUNC PRINT
https://appceso.com