FV6020 User Manual
- 44 -
user want to dial PSTN
（
010 6228
）
by SIP1
，
while actually the called number should be
86106228
，
then we can configure called number
as 010T, then rep
：
8610
，
and then set the
replacing length as 3. So that when user make a
call with 010 prefix, the number will be replaced
as 8610 plus the number and then sent out.
Relace the number that user dialed before
sending to SIP1 server.
Here alias is
rep:
(not rep)
User dial 010 6228
SIP1 server receive8610 6228
this is optional configuration item.it is to add
number behind the number user had dialed. when
no configuration has been made, shown as no
suffix
User dial 147
Sip1 server receive 147 0011
Example 2
When user dial 200 , It will pass through SIP2
When user dial 2009 , It will pass through SIP2
When user dial 20096, It will pass through SIP2
When user dial 201, It will pass through
SIP1
When user dial 20, It will pass through
SIP1
6.9 Config Manage (Save and Clear configuration)
Notice: clear config in admin mode, all settings restores to factory default; clear config
in guest modem, all settings except sip, advance sip restore to factory default.
6.9.1 Save Config
Once change is made, Users should save the modified configuration to take effect,
otherwise the IP Phone will go back to the last saved setting after phone reboot.
The interface of
“
Save Config
”
as below, please follow the four steps below to config.
