FV6020 User Manual
- 32 -
Firewall setting page. User may set up firewall to prevent unauthorized Internet users
from accessing private networks connected to the Internet (input rule), or prevent
unauthorized private network devices to access the internet.
Access list support two type limits: input_access limit or output_access limit. Each type
support 10 items maximum.
FV6020 firewall filter is base WAN port. So the source address or input destination
address should be WAN port IP address.
Configuration:
in_access enable
enable in_access rule
out_access enable
enable out_access rule
Input/Output:
specify current adding rule is input rule or output rule.
Deny/Permit:
specify current adding rule is deny rule or permit rule.
Protocol Type:
protocol using in this rule: TCP/IP/ICMP/UDP.
Port Range:
port range if this rule
Src Addr:
source address. can be single IP address or network address.
Dest Addr:
destination address.can be IP address or network address.
Src Mask:
source address mask. Indicate the source is dedicate IP if set to
255.255.255.255. Otherwise is network ID
Des Mask:
Destination address mask. Indicate the source is dedicate IP if set to
255.255.255.255. Otherwise is network ID
6.7.5 QOS 802.1p Configuration
