5
OPERATION
SETTINGS
Place the Beyond Guardian Air in a location away form the wall that allows air to move freely into, around and out of the unit.
DO NOT place the unit:
• Directly on or near soft furnishing (such as bedding or curtains)
• Near electronically sensitive devices such as a computer (within 6 in / 10 in)
• Near sources of heat (such ad radiators, fireplaces or ovens)
• Near oxygen tanks or other combustible gases
• Near water, outdoors or in a damp or wet areas (such as bathrooms)
WARNING:
When turning the Beyond Guardian Air on, turn the speed control to maximum airflow for a few minutes of fast
initial cleaning. Then adjust the control to the desired speed.
There are four settings on the Beyond Guardian Air:
1. HEPASilent
2. Moderate fan speed (for normal use)
3. High fan speed (for a large room)
4. Maximum operation (for fast initial cleaning)
For best results, run your Beyond Guardian Air 24 hours a day, 7 days a week. Continuous operation means you
get a continuous supply of clean, purified air circulating throughout the room. Open windows and/or doors may
affect the performance.
NOTE:
Safety switch automatically turns power off when door is opened.
M A X
a i r f l
o w
H E P
A s i l e
n t ™
MAINTENANCE
Our air purifiers are designed for maximum improvement of indoor air with minimum impact on the environment.
The Beyond HEPA particle filter is made of polypropylene, an eco-friendly plastic. Unlike other common filters, our filter contains no aluminum, triclosan or other
chemical additives.
All major parts are made from high-quality galvanized steel, not plastic. The steel housing is noise-muffling, providing quiet operation. The external parts have
been powder coated for endurance and environmental protection.
The Beyond Guardian Air is energy efficient. From lowest to highest speed, it uses from 23 to 80 watts – no more than a lightbulb.
Beyond by Aerus® air purification systems are built for years of use.
KEEP YOUR BEYOND GUARDIAN AIR LOOKING GOOD AND WORKING WELL
The Beyond Guardian Air features award-winning design, materials and workmanship.
Keep your unit in top condition with these cleaning tips:
•
Always unplug unit before cleaning
•
Wipe the exterior with a soft, clean, damp cloth
•
Vacuum the small inlets on each end panel with a soft brush attachment
•
Clean inside the ion chamber by opening the front door of the unit and opening the door of the ion
chamber (right-hand side)
•
Never clean with gasoline, chemical solvents or corrosive materials – they may damage the surface
AIR
PUR
IFIC
ATI
ON
SYS
TEM
H E P
A s i
l e n
t
™
MA X
a i r f
l o w