7
5-4 Set the maximum speed using the Rotation Adjustment
Key (+/-).
5-5 Select FWD/REV rotation using the FWD/REV Select key.
5-6 The micro motor operation is controlled by the air switch/
foot pedal of the delivery unit.
5-7 Program Function.
You can memorize the setting:
1) set the values for gear ratio, speed
2) Press P1 or P2 key for more than 3 seconds until it
beeping, the setting is completed.
Push
Digital Speed Display
Increase
Decrease
FWD/REV Lamp
6. Sterilization
Sterilize the motor only.
For sterilization, we recommend the autoclave sterilization
method.
Sterilization is required the first time you use the unit as well
as after each patient as noted below.
Autoclaving
1)Turn off the power.
2) Detach the motor from the motor cord.
3) Clean the surface of the motor with a brush (Do not use a
metal brush), and wipe it with cotton and disinfectant alcohol.
4) Screw the Motor Cap to the Motor. Put the Autoclave Plug
onto the motor insert.
5) Insert into autoclave ouch. Seal the pouch.
6) Autoclavable up to a maximum of 135°C.
7) Keep the Motor in the autoclavable pouch until you are
ready to use it to keep it clean.
Caution
- Do not autoclave (or any other high temperature sterilization) Control Box, AC Adaptor, or Motor
Cord.
- Do not lubricate the motor.
- Do not wipe or immerse the system in acidic water or acidic solutions.
- Do not sterilize with dirt on the surface, it may cause rust.
Autoclave Plug
Motor Cap
Tighten