16
7. Environmental Protection
There is no harmful factor in our product. You can deal with it based on the local law.
8. Manufactrurer’s rights
We reserve the rights to change the design of the equipment, the technique, fittings, the instruction
manual and the content of the original packing list at any time without notice. If there are some
differences between blueprint and real equipment, take the real equipment as the norm.
9. Please contact us for more information
10. Declaration of conformity
10.1 Product conformity the following standards.
EN ISO 14971:2000+A1:2003
EN 980:2003/ ISO 9687:1993 / EN 1041:1998
EN 60601-1:1990+A1:1993+A2:1995+A13:1996
EN 60601-1-4:2001 * EN 60601-1-2: 2001 +A1:2006
EN ISO 7405:1997
EN ISO 10993-1:2003 / EN ISO 10993-5:1999
EN ISO 10993-10:2003+A1:2003
EN 61205:1994 / EN ISO 22374:2005
EN ISO 17664:2004 / EN ISO 17665-1:2006
10.2 EMC-Declaration of conformity
Guidance & Declaration – electromagnetic immunity
The model COMFORT-SONIC is intended for using in the electromagnetic environment specified below. The
customer or the user of the model COMFORT-SONIC should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment- guideance
RF emissions CISPR 11
Group 1
The model COMFORT-SONIC uses RF energy only
for its internal function. Therefore, its RF emissions are
very low and are not likely to cause any interference in
nearby electronic equipment
RF emission CISPR 11
Class B
The model COMFORT-SONIC is suitable for used in
domestic establishment and in establishment directly
connected to a alow voltage power supply network
which supplies buildings used for domestic purposes.
Harmonic emissions IEC61000-
3-2
Class A
Voltage fluctuations/ flicker
emissions 1EC61000-3-3
Not applicable
