Beyerdynamic USB WL Adapter, Operating Instructions Manual, Page: 8 / 54

Operation
8/10 USB WL Adapter
OPERATION
Inserting / removing the USB WL
Adapter
The following platforms/operating systems are supported:
• Windows 10 (32bit/ 64bit) and future Windows releases
• macOS 10.14.6 (Mojave) and 10.15.7 (Catalina) and future
operating systems
Plugging in:
►
Plug the USB WL Adapter into the USB port on the
desired PC/laptop.
Once plugged in, the USB WL Adapter is displayed as
“USB WL Adapter” on the computer.
Removal:
►
Pull the USB WL Adapter out of the USB connection on
the PC/laptop.
Connecting compatible Bluetooth®
products from beyerdynamic and
laptop/PC with USB WL Adapter via
Bluetooth® (pairing)
Before you can use compatible Bluetooth® products
from beyerdynamic, you must connect them with your
mobile phone or another Bluetooth®-enabled device. The
connection process may differ depending on the device.
With the USB WL Adapter, a laptop/PC can be connected
with up to three Bluetooth®-enabled devices from
beyerdynamic.
Pairing with a USB WL Adapter on a PC/laptop is
described here.
►
Please refer to the relevant operating instructions of
the device you wish to pair the beyerdynamic USB WL
Adapter with.
Connect the USB WL Adapter to a suitable
beyerdynamic Bluetooth® device:
9
The output device (PC/laptop) is switched on.
9
The beyerdynamic Bluetooth® device is switched on.
1 . Plug the USB WL Adapter into the USB port on the PC/
laptop.
2 . Press the Sync button (1) on the USB WL Adapter for
3 seconds..
The LED display flashes alternately blue and red.
3 . Carry out pairing as described in the operating
instructions of your beyerdynamic Bluetooth® product.
After successful pairing, the LED display of your USB WL
Adapter flashes alternately blue and white three times.
Briefly pressing the
Sync button (1)
causes the USB WL
adapter to start searching for a device in the pairing list
and establish a connection with it.
Deleting the list of already connected devices:
►
Press the
Sync button (1)
on the USB WL Adapter for
10 seconds.
The LED display flashes yellow.
The list of already connected Bluetooth® devices
(maximum 3) is deleted.
Overview of the LED displays
LED display Function
Lights up steady white No connection, not in
pairing mode
Flashes rapidly red and
blue
Pairing mode
Flashes three times blue
and white
Pairing successful
Flashes rapidly yellow Pairing list cleared
Lights up steady blue Device connected
Lights up steady green Call in progress
Lights up steady red Mute
USB WL Adapter-supported functions
When paired with PC or laptop devices, the USB WL
Adapter enables the use of functions such as
mute
and
call functions
(hang up) that are often not supported by
the playback devices.
►
Please refer to the operating instructions of your
beyerdynamic Bluetooth® product.
HELP WITH PROBLEMS / FAQ
The volume of the Bluetooth® device cannot be adjusted
from the PC .
The audio signal
transmitted by the USB WL
Adapter is not processed
by the receiving device.
►
Adjust the volume
directly in the sound
reproduction app.
No audio output .
There is no Bluetooth®
connection.
►
Make sure that the
hands-free system has
been successfully paired
with the USB WL Adapter.
Bluetooth device is connected to another/the wrong
device .
There is already a
Bluetooth® connection to
another playback device.
►
Switch off the incorrectly
connected device.
►
Reset the USB WL
Adapter to factory
settings and disconnect
it from the USB port.
Activate pairing mode,
plug in the USB WL
Adapter again (minimise
the distance between
the USB WL Adapter and
the Bluetooth® device)
and carry out pairing
again.