Unite CC – Cockpit Case
16
6.4 Automatic Firmware Update
•
By using the Unite Cockpit Case you can upload firmware updates to Unite transmitters/receivers.
•
With the current factory setting the Unite Cockpit Case will automatically update the firmware of the Unite
transmitters/receivers during the
first
charging process. Just insert the transmitters/receivers into the charging
compartments.
During the firmware update the status indicator light of the Unite transmitters/receivers will illuminate red. This
process will take approx. 5 minutes. Should the process take longer than 10 minutes, turn the Unite Cockpit Case off
and on again. The update process will then restart.
Attention:
Please note that after a successful update to a new firmware version, the Unite transmitters/receivers are no longer
compatible with older firmware versions.
6.5 Conditioning the battery
•
In order to achieve the maximum capacity of the battery, we recommend discharging the transmitters/receivers
completely to carry out a complete charging cycle afterwards.
•
This also increases the accuracy of the battery indicator on the display of the Unite transmitters/receivers.
6.6 Service mode
•
For maximum operational reliability, the Unite Cockpit Case features a so-called service mode.
•
If the device is disconnected from the mains within 45 seconds after being switched on (e.g. by accidental
switching off), the device will boot in a safety mode and check itself.
•
If this service mode is activated automatically (after booting unsuccessfully), the system will return to its usual
operating mode after approx. 3 minutes.
