TG 500 – Diversity receiver
12
•
Frequency group (GR) / Channel (CH)
In the “GR/CH” menu, you can select a predefined (intermodulation-free) frequency
group and a channel from this group.
Press the enter button
to open the submenu.
Press the up
or down button
to select the desired group. Depending on the
frequency band, you can select from up to 8 groups. In each group, the channels are
arranged in irregular frequency intervals. This means that interference between the
transmitters is largely avoided.
Press the enter button
to confirm.
Note:
for multi-channel systems, the frequencies must be within one group.
Press the enter button
to so that you can select the desired channel from the
previously selected group. Press the up
or down button
to select the channel.
Press the enter button
to confirm.
•
Manual frequency
In the “FREQ MAN” menu, you can manually select any frequency from a
corresponding frequency band in 25kHz increments, regardless of whether it is
stored in a group.
Press the enter button
to open the submenu.
Press the up
or down button
to select the first three figures of the desired
frequency.
Press the enter button
to confirm.
Press the up
or down button
to select the last three figures of the desired
frequency.
Press the enter button
to confirm.
Figure 2-23: Selecting the “Frequency group (GR) /
Channel (CH)” submenu
gr/ch
--/--
Figure 2-24: Selecting the frequency group (GR)
gr/ch
01/01
"
"
"
"
Figure 2-25: Selecting the channel (CH)
gr/ch
01/01
"
"
"
"
Figure 2-26: Selecting the “Frequency” submenu
freq man
794.000
Figure 2-27: Selecting the frequency – first three
figures
freq man
794.000
"
"
"
"
Figure 2-28: Selecting the frequency – last three
figures
freq man
800.000
"
"
"
"
