Synexis – Synexis RP2 Beltpack Receiver
8
2.3
Battery status display
•
The battery status is displayed
in 4 stages.
•
If only one bar is displayed, you should recharge the receiver as soon as possible.
•
If the battery frame is flashing, the batteries are empty and have to be replaced or
recharged.
•
If the receiver is equipped with rechargeable NiMH batteries, put it into the
appropriate charger (e.g. Synexis C8 or C10). Despite the Auto-Off function we
recommend turning off the receiver before charging.
The LED
indicates the charging status:
LED is flashing blue . . . . . . . . . . The batteries are being charged
LED illuminates blue. . . . . . . . . . The batteries are fully charged
LED is flashing red . . . . . . . . . . . Error
2.4
Headphone connection
•
Connect a beyerdynamic headphone with mono or stereo mini jack plug to the
headphone socket
.
2.5
How to turn the receiver on/off and control the volume
•
Switch on the beltpack receiver by turning the control
clockwise to the right.
•
The LED
will illuminate:
blue, when a transmitter is turned on and reception available.
red, when there is no transmitter turned on or no reception available.
•
Use the control
to set the requested volume by turning it more clockwise.
•
The selected channel and the battery status are displayed
.
•
After use, switch off the receiver by turning the control
anti-clockwise.
•
The LED
will go out.
CAUTION
• Do not set the volume too high, because listening at high levels can damage
your hearing.
2.6
How to select and lock a channel
•
Use one of the two channel selector buttons
to select the requested channel.
•
If you release the channel selector button
, the channel will automatically be
stored after approx. 3 seconds.
•
If you would like to lock the selected channel to avoid accidental shifting, hold
down the Set button
for about 3 seconds. A key symbol will be displayed
.
The channel is locked.
If you would like to unlock a locked channel, hold down the Set button
for
about 3 seconds. The key symbol in the display
will disappear.
2.7
How to display the frequency
•
Press the Set button
briefly.
•
The frequency will be displayed
for a few seconds.
