Beyerdynamic MC 910, Product Information

Page: 11 / 28

11
e
n
g
li
sh
How to select the Pre-attenuation
For higher sound pressure levels a pre-attenuation of
15 dB can be applied with the right slide switch on the
front of the microphones (imprint: -15 dB).
How to select the Low-cut Filter
If a directional microphone (pressure gradient) is used for
close vocal miking the low frequencies are pre-emphasised;
this is known as proximity effect. To compensate this
effect, the MC 930 and MC 950 provide a switchable
low-cut filter on the front (left) below 250 Hz with
6 dB/octave. With the MC 910 the sound characteristic of
the microphone can be changed with this switch.
Maintenance
For cleaning metal surfaces, use a soft, damp cloth using
only gentle cleansing agents (such as washing-up liquid).
Make sure that no water drops into the microphone and
do not use any solvent cleansers.
Clean the WS 101 wind shield in clear, warm water. It
should be completely dry, before it is used again.
Service
Servicing must be carried out by qualified service
personnel only. Dismantling the microphone yourself will
invalidate the guarantee.
Versions
Model Description . . . . . . . . . . . . . . . Order #
MC 910 Condenser microphone,
omnidirectional, with MKV 9
microphone clamp with
3/8" - 5/8" internal thread,
for microphone shaft diameter
19 - 21 mm . . . . . . . . . . . . . . . .499.986
MC 930 Condenser microphone,
cardioid, with MKV 9
microphone clamp with
3/8" - 5/8" internal thread,
for microphone shaft diameter
19 - 21 mm . . . . . . . . . . . . . . . .465.267