Beyerdynamic LAGOON ANC B STOCK, Manual

Page: 8 / 164

Lagoon ANC – Bluetooth® Headphones
8
How to use the touch pad
Please make sure that your finger remains within the boundaries
of the circular-shaped touch pad as shown in the drawing.
3. Activate the Bluetooth® function on the
player and, if necessary, search for new
devices.
4. Select “Lagoon ANC” from the available
devices in the Bluetooth® menu of the
player and connect both devices.
5. The Light Guide System displays a successful
Bluetooth® connection by a blue light
fading in. Each time when turning on, both
devices connect automatically when in
range.
1. Set the switch
3
to the “On” position.
2. Set the switch
3
for three seconds to the
“Pairing” position.
The Light Guide System displays the pairing
mode by flashing blue alternately in the left
and right earcup.
3
“Pairing” position
Pairing with the player
Before you use the headphones for the first time, you have to pair them with your mobile phone or
another Bluetooth® enabled device. The pairing process may be different with various players. Please
refer to the appropriate manual of the player.
Pairing with the player via NFC
Alternatively, you can connect the headphones with an NFC-
capable player through NFC. The headphones must be
switched on. It does not matter whether the headphones are in
pairing mode or not.
1.
Set the switch
3
to the “On” position.
2. Activate the NFC function in the player.
Note: Some players have not activated their
built-in NFC chip for pairing purposes.
3. Hold the player over the left earcup so that both NFC chips
are close to each other. Sliding the player over the left
earcup may aid connectivity.