Beyerdynamic 717649, Operating Instructions Manual

Page: 12 / 84

Help with problems / FAQ
12/14 Blue BYRD
Overview of the LED displays
LED display Function
Flashes red/yellow/green Charging
Steady green light Fully charged
Lights up once red for 1.5 s Switch off
Flashes rapidly red Battery almost empty
Flashes alternately blue
and red
Bluetooth® pairing mode
active
Flashes blue briefly every
7 sa
Bluetooth® connection
active
Flashes blue briefly every
3 s
Bluetooth® connection lost
Flashes blue briefly every
7 s
Media playback active
Flashes rapidly blue Incoming call
Flashes blue briefly every
7 s
Call active
Lights up pink three times
per s
Software update mode
active
Settings for best sound
To achieve the best possible Bluetooth® sound with
your in-ear headphones, please observe the following
practical tips:
1. Set the volume to minimum on the in-ear headphones
and to maximum on the playback device.
2. Then adjust the volume only on the in-ear headphones,
not on the playback device.
This applies only to playback devices that do not
automatically synchronise the volume. On playback
devices that automatically synchronise the volume
(e.g. iPhone, iPad and various Android smartphones), the
headphone volume is always identical to the volume of
the playback device.
3. Deactivate any audio effects that may be present in
the software of the playback device.
HELP WITH PROBLEMS / FAQ
In-ear headphones will not switch on
Battery is empty or almost
empty.
►
Charge the battery.
No audio output .
There is no Bluetooth®
connection.
►
Pair in-ear headphones
with the playback
device.
The in-ear headphones do not appear among the
available Bluetooth® devices on the playback device .
The in-ear headphones are
switched off.
►
Switch on the in-ear
headphones.
The in-ear headphones are
not in pairing mode.
►
Set the in-ear head-
phones to pairing mode.
There is already a
Bluetooth® connection to
another playback device.
►
Disconnect the
Bluetooth® connection
to the other playback
device and connect the
in-ear headphones to
the desired device.
Playback volume is too low, although set to maximum on
the in-ear headphones
The audio signal being
played back is too quiet.
►
Set playback volume on
the playback device to
maximum.
The sound is harsh and the bass reproduction too low
Insufficient seal on the
earphones.
Try out alternative left and
right eartips until sound is
ideal.
The wireless range is too low, or the connection is
disrupted
There is interference with
other devices.
►
Keep your distance
from WLAN routers and
microwave ovens.
►
Do not stand between
playback device and
in-ear headphones.
BATTERY LIFE
• Disconnect the USB connection cable from the charger
and in-ear headphones when battery is fully charged.
•
High temperatures, especially with a high charge level,
can cause irreversible damage.
• For battery storage, see Seite 7.
• Switch off the battery-powered product after use.
CLEANING AND MAINTENANCE
•
Use a soft cloth moistened with alcohol cleaner to
clean all parts of the in-ear headphones. Make sure
that no liquid enters the housing or the transducer.
• Do not use cleaners containing solvents, as these can
damage the surface.
SPARE PARTS
Spare parts for the in-ear headphones can be found at
www.beyerdynamic.com/service.