INSTALLATION GUIDE, WAVEE TOUCHLESS SWITCH
BEXAR TECHNOLOGY PARTNERS
Page
7
of
10
revision 2
Configuration
The Wavee device includes a Bluetooth interface that allows custom configuration and firmware
updates. Navigate to the Apple or Google Play store and install the Wavee Configurator application.
There are two ways to configure the Wavee device; by command or by profile.
Configuration by Command
Individual parameters can be configured one at a time by sending commands.
1.
Launch the Wavee Configurator app and navigate to the Device Scanner page.
2.
Select the Bluetooth icon in the upper right corner. This will cause the app to scan for Wavee
devices. After several seconds, the app will display all detected devices.
3.
Select the desired device. Three button will be displayed allowing you to write a profile, send a
command, or update the device.
4.
Select the Send Command button. A list of available commands will be presented.
5.
Select the desired command and change the setting. In the example below we are disabling the
buzzer.
6.
Select the Send button. A Command response will be received acknowledging the command.
