K12 Installation & User Manual
15
Program codes
Press B and enter the password.
Enter
A21
.
Enter the desired code location using two
digits (01-30).
Enter the code for the current code location
(four digits for code location 01-20 or six
digits for code location 21-30).
Note! The four first digits in a 6-digit code
must not be the same as the digits in a 4-
digit code and the other way around.
Choose whether or not the code should be
disabled from a time clock.
0 = No time control
1 = Code disabled from time clock 1
1 = Code disabled from time clock 2
Choose which relay output to control
0 = Both relay outputs
1 = Door relay. Always used in monostable
alarm by-pass mode
2 = Alarm by-pass relay.
Program the next code by continuing from
step 3 or press B to exit.
Press B (leaves programming mode).
1�
2�
3�
4�
5�
6�
7�
8�