Beward N 13102 Operation User'S Manual Download Page 64

Page: 64 / 101

Chapter 9. SETTING: Events

N13102 Operations User Manual

Pic. 9.14

If the test is not successfully completed, please check network storage address, its

availability and account settings.

IMPORTANT:

To playback recorded video, use the integrated player at

SETTING

– Camera – Playback

, otherwise you

may need to install third party software, e.g. VLC media player. Its official website is

http://www.videolan.org/vlc/

9.3.2. Alarm Sending

This menu allows you to configure alarm triggered (e.g. motion detection triggered)

recording to network attached storage. Select the option for

[On]

(

Pic. 9.15

) to enable this function

or select the option for

[Off]

to disable it.

NOTE:

The path to the

«Alarm»

folder where the alarm records are stored is the same as is specified for the

network storage.

Summary of Contents for N 13102






































































































Search results

Summary of Contents for N 13102

Reviews:

Related manuals for N 13102

Brands by name

Popular brands

Beward N 13102, Operation User'S Manual

Search results

Summary of Contents for N 13102

Reviews:

Related manuals for N 13102

Brands by name

Popular brands