4
Hazardous voltage.
Can shock, burn or kill.
Turn power off
Unplug power cord before
Servicing or cleaning.
Hazardous voltage.
Can shock, burn or kill.
Unit must be grounded to
prevent injury. Check
ground pin on plug. Do not
use if pin is bent or
RECOGNIZE SAFETY INFORMATION
This is the safety alert symbol. When you see this symbol on your equipment or
in this manual be alert to the potential for personal injury or damage to your unit.
Be sure you understand all safety messages and always follow recommended
precautions and safe operating practices.
UNDERSTAND SIGNAL WORDS
Important safety information is presented in this section and throughout the manual. These signal words are
used in the warnings and safety messages.
WARNING LABELS AND SAFETY INSTRUCTIONS
!
!
WARNING:
can
Severe injury or death
occur if you ignore the message.
!
!
!
DANGER: Severe injury or death will occur if you ignore the message.
!
!
CAUTION: Minor injury or damage can occur if you ignore the message. CAUTION also calls
attention to safety messagesin this manual
!
!
NOTICE: This is important installation, operation or maintenance information that you should pay
special attention to. If you ignore this information,you may damage your unit.
AVOID INJURY FROM HIGH VOLTAGE
ELECTRICAL SHOCK
PREPARE FOR EMERGENCIES
Disconnect power before cleaning or servicing the
unit. Do not spray with water or steam. Use a damp
cloth to clean.
Be sure outlet is grounded:
Check ground pin on plug
Do not use if pin is bent or missing
Never remove ground pin from plug
Be prepared if a fire starts.
Keep a first aid kit and fire extinguisher handy.
Keep emergency numbers for doctors, ambulance
service, hospital and fire department near your
telephone.
!
!
!
