Installing Flavors
1. Locate the appropriately labeled box and line (we recommend labelling
your lines if they are not already marked).
2. Hold the QDC by placing the index finger of your left hand under the
flavor line and the index finger of your right hand under the capped
flavor peg on the other side of the QDC.
3. Place your thumbs on the side tabs on top of the QDC and press them
outwards, sliding the center back until it fully disengages and clicks
twice.
Proper holding technique for a QDC
4. Slide the connector sideways and off the spout of the bag. The old box
can now be removed and discarded.
5. Open a new box of flavor concentrate by pressing in on the perforated
area. The label should be inspected to confirm flavor number and
ensure it is not expired.
6. Pull the spout out of the opening and ensure that the bag is not
bunched up and that concentrate can freely get to the spout.
7. Remove the cap from the spout. This can be discarded or kept with the
box to recap the bag upon removal. Ensure that the spout faces
upwards when doing this to avoid spills.
8. Place the new box in the appropriate area, checking that the spout is
facing outwards and hangs down slightly so concentrate can freely flow
© 2018 Bevi. All rights reserved. [email protected]