User Manual for PF Freezers
Beverage-Air
Rev. 12/20
Beverage-Air
12
USING THE UNIT
Icons
Increase
Decrease
Operation is simple, just keep it connected to the correct
power supply and the refrigerator will maintain the
internal temperature it has been set to. Keep the doors
and / or drawers closed as much as possible to avoid
unnecessary run time.
The controller displays the current internal temperature.
Adjusting the set temperature lower will NOT cause the
system to lower the temperature faster. When on, the
refrigeration system is always operating at maximum.
For best results, make certain the unit remains powered
and has achieved the desired set point before loading it
with product. Pull down time will vary depending upon
the type of unit and ambient conditions.
The temperature was set at the factory at 0
º
F, but you can
adjust it to your own selected temperature. See page 16.
The Refrigerator will automatically defrost as needed,
there is no set time for defrost. Push and immediately
release the "melting" or defrost button for a manual
defrost.
The internal fan will be on when the compressor is on and
when the doors are closed.
The compressor and condenser fan motor will only be on
when the controller senses an increase in internal cabinet
temperature passed the set point.
Display
Changes begin with SET