16
For individual adjustment there is the option of carefully shortening the small
hook on the device using a pair of scissors. When doing so, it is
important to only cut off a small amount at a time and to repeat
this, if necessary, until you have made the hook the right size.
Check whether it is a good fi t after each cut. To make it comfort-
able to wear, please ensure that the cuts are even and round off
the corners.
Please ensure that the hook is securely connected to the device
and note that it cannot be replaced.
5.3 Use
1. Press and hold the ON/OFF button on the snore stopper for three seconds.
The operation light begins to light up. The snore stopper is now switched
on. If the snore stopper cannot be switched on, the battery in it is fl at. Re-
charge the battery as described in Chapter “6. Charging the battery”. After
a short time, the operation light switches off so that it does not disturb you
in the night.
2. Attach the snore stopper to your left or right ear as shown.
3. Go to bed.
4. As soon as you get up, switch off the snore stopper. To do this, press and
hold the ON/OFF button on the snore stopper for three seconds. A short
vibration confi rms that the snore stopper has been successfully switched off .
Initially, it may take up to 7 days until you are accustomed to the device.
6. Charging the battery
1. Open the cover on the micro USB connection of the snore stopper.
2. Connect the charging cable included in delivery to the snore stopper and
a computer that is switched on. Alternatively, connect the charging cable
with the snore stopper and the mains adapter. Insert the mains adapter
into a suitable socket.
3. Whilst charging, the operation light fl ashes green. As soon as the battery is
fully charged, the operation light will remain green.
4. It usually takes approx. 3 hours to fully charge the battery. As soon as the
battery is completely charged, remove the charging cable from the computer
or the socket and the mains adapter and the snore stopper.
