16
8. Troubleshooting
Problem/
question
Possible cause/remedy
The ON/OFF
switch has
been swit-
ched on, but
the device is
not working.
Check the power connection to
the socket and check whether the
mains plug has been plugged in
correctly.
The device is
switched on
but produces
no or hardly
any steam.
1. Check that there is water in the
container of the water heater
tank.
2. Check that there is liquid in the
aromatherapy container.
3. Make sure that the suction tube
and other components have
been attached properly.
4. Check the nozzle for blockages.
Clean the nozzle if necessa-
ry (see “Cleaning the nozzle”
section in the “Cleaning and
disinfection” chapter)
Does every-
one need
a separate
mask?
Yes, this is absolutely essential for
hygiene reasons.
9. Technical specifications
Model
SI 40
Dimensions
(W x H x D)
265 x 260 x 96 mm
Weight
620 g
Filling volume
of internal water
heater
Max. 25 ml
Filling volume of
aroma tank
Max. 60 ml
Mains connection 220 – 240 V~; 50 – 60 Hz
Steam
temperature
Approx. 43°C
Water boiling time
Approx. 2 minutes
Maximum
operation time
Approx. 10 minutes
Operating
conditions
Temperature: +10°C to +40°C
Relative humidity: 10% to 95%
Ambient pressure: 700 hPa to
1060 hPa
Storage and
transportation
conditions
Temperature: 0°C to +60°C
Relative humidity: 10% to 95%
Ambient pressure: 500 hPa
to 1060 hPa
Subject to technical changes.
Please contact the specified service address to ob-
tain further information, such as the CE Declaration
of Conformity.
10. Replacement parts and
wearing parts
Designation
Material
REF
Mask
PVC
601.34
11. Warranty and service
In case of a claim under the warranty please contact
your local dealer or the local representation which is
mentioned in the list “service international”.
In case of returning the unit please add a copy of
your receipt and a short report of the defect.
The following warranty terms shall apply:
1. The warranty period for BEURER products is
either 3 years or – if longer – the country specific
warranty period from date of Purchase.
In case of a warranty claim, the date of purchase
has to be proven by means of the sales receipt or
invoice.
2. Repairs (complete unit or parts of the unit) do not
extend the warranty period.
3. The warranty shall not be valid for damages
because of
a. improper treatment, e.g. nonobservance of the
user instructions.
b. repairs or tampering by the customer or
unauthorised third parties.
