30
6. Initial use
6.1 Inserting the water filter and pre-filter
1. Open the cardboard packaging.
2. Remove the cover from the maremed
®
in an upward direction. Remove the protective
foam from the golden sensor pins on the underside of the cover.
3. Remove the film packaging from the water filter and take out the two pre-filters.
4. Remove the pre-filter holders from the device cover. Place the pre-filters into the two
pre-filter holders. The smooth, firm side must be positioned towards the inside of the
device.
+
=
5. Then place the pre-filter holders into the cover of the maremed
®
.
When inserting the
pre-filter holders, make sure that the triangle markings are aligned. The triangle
markings are located on the underside of the pre-filter holders and on the underside
of the cover.
Summary of Contents for maremed MK 500
Page 154: ...154 ...
Page 155: ...155 ...
