Beurer IL 50, Instructions For Use Manual

Page: 7 / 12

7
Treatment duration
Important
• Risk of burns: Remove any metal items, e.g. belt buckles, necklaces, bras, jewellery or piercings, from the
treatment area before switching on the device as they can become very hot.
We recommend short treatment times at the beginning. However, even when the unit is used correctly, the
skin of some people can have an oversensitive or allergic reaction to the heat treatment (e.g. intense redness,
blisters, itching, heavy sweating).
8. Use
Starting the unit
Important
• Always close or cover your eyes when radiating the face.
• Press the On/Off switch (3)
• The unit will turn on automatically after a short time.
• Set the time selector (5) to the desired duration (1 to 15 minutes).
• You can press the time selector (5) during operation to reset the treatment duration.
• The infrared radiant heater switches off automatically after the set time.
• For an additional treatment, you only need to press the time selector (5) to reset your individual treatment time.
Important
• Do not touch the hot glass.
• To end treatment, use the On/Off switch (3) and disconnect the power plug.
During treatment
• Examine the part of the body treated frequently and check for skin reactions. Cease exposure immediately if
there are any signs of oversensitivity or an allergic reaction, and consult a doctor.
• The unit can be switched off at any time using the On/Off switch (3).
• Do not cover up or pack the unit away while it is warm.
After treatment
• The fan will continue running for 5 minutes after you have finished using the device in order to cool it down.
Please do not unplug the device during this period.
• Once the cooling period has finished, the fan will switch itself off. Switch off the device and remove the mains
plug from the socket.
9. Cleaning, changing the infrared lamp, fuse and storage
Cleaning
Important
Before cleaning the unit, switch it off, unplug it and allow it to cool down completely.
Important
• Ensure that no water enters the unit!
• Do not wash the unit in a dishwasher!
The unit can be cleaned with a damp cloth. Do not use cleaning agents. It is recommended to clean the device
after each use.
Replacing the fuse (UK plug only)
If the fuse needs replacing, please observe the following:
• Remove the mains plug.
• Lift out the fuse holder from the inside of the mains plug using a flat screwdriver.