Charging the hearing amplifiers with
the storage box with
charging function
To charge the devices
and batteries, connect
the mains part to a socket, plug in the
supplied micro-USB
cable and connect it with your storage box
with charging function.
Flashing green light:
Devices and batteries are charging.
Permanent green light:
Devices and batteries are fully charged.
In general, it takes 2 hours until the devices and batteries are fully charged.
Make sure the volume button is initially set to the lowest setting before operating the hearing
amplifier.
•
The charging process can be carried out with the lid open or closed.
•
The hearing amplifiers should be stored in the storage box with charging function after they have
been charged fully and whilst you are not wearing them.
7. Usage
Adjusting your hearing amplifier
1.
The hearing tubes are printed with “2B” in red
and blue respectively. “Red” is for
the right and “blue” is for the left ear.
2.
Attach the earplug to the sound tube by pushing
it over the grooves on the tube
until it sits securely in place.
3.
Place the hearing amplifier case behind your
ear. The curved part of the sound
tube should sit comfortably on the ear (next to
the arm of the glasses for glasses
wearers).
4.
Hold the sound tube in place and carefully
position the earplug in the ear
canal. Make sure not to insert the earplug too
deeply into the ear canal. If the
earplug is not properly in place or feels uncomfortable, try a different earplug.
5.
P lace the fixing tube along your outer ear. This
ensures the earplug sits more tightly
in your ear. If the fixing tube bothers you, you
can remove it at the connecting point
to the speaker. It is not absolutely necessary.
Check whether you have selected the correct size of earplug by moving your head slowly up and
down and then left and right while opening and closing your jaw. If the earplug slips out, it is too
small. If you wear glasses, place the arm of the glasses between your head and the hearing
amplifier.
IMPORTANT
Not
e
: