30
Saving, displaying and deleting measured values
User memor
y
The results of every successful measurement are stored
together with the date and time. If there are more than
100 measurements, the oldest measurements are lost.
• Press the
SET
setting button. Select the relevant user
memory ( or
2
) by pressing the
-
/
+
function buttons.
Confirm your selection using the
START/STOP
button
.
Aver
age values
Press the
M
memory button.
lights up on the display.
The average value of all saved measured
values in this user memory is displayed.
Press the
M
memory button.
lights up on the display.
The average value of the morning
measurements for the last 7 days is
displayed (morning: 5 a.m. – 9 a.m.).
Press the
M
memory button.
lights up on the display.
The average value of the evening
measurements for the last 7 days is
displayed (evening: 6 p.m. – 8 p.m.).
Individual measur
ed values
When the
M
memory button is pressed
again, the last individual measured
values in each case are displayed
with the date and time (for example
measurement 03).
When the memory button
M
is pressed again, you can
view your individual measured values.
To switch the device off again, press the
START/STOP
button . If you forget to switch off the unit, it will switch
off automatically after 1 minute.
You can exit the menu at any time by pressing the
START/STOP
button .
Deleting measur
ed values
To delete the memory of the selected user memory,
press the
M
memory button in switched-off state.
The average value of all measurements appears on
the display; in parallel, lights up.
Press and hold down both function buttons
-/+
simultaneously for 5 seconds.
appears on the display. All the
values in the selected user memory have
now been deleted.
