22
• If the breast pump still does not extract any milk from your breasts after five minutes, stop using it and
try again later.
• If you experience any sharp pains when using the breast pump, consult a doctor.
7.2 Operating the breast pump
1. Before using the breast pump, wash your hands and breasts thor-
oughly.
2. Sit with your upper body lent forwards slightly. You can support
your back better by using a pillow.
3. Place the breast shield with silicone cushion gently on the breast.
Make sure that the nipple is completely enclosed and there are no
air pockets. To ensure proper function, the breast shield must be
drawn firmly onto the breast.
4. To switch on the breast pump, press the button. The breast
pump will begin automatically in stimulation mode (
) and a
two-minute timer will appear on the display. During these two min-
utes, your breast nipple will be stimulated in order to prepare it for
pumping the breast milk. Use the / buttons to set the desired
stimulation intensity.
1. Switch on
stimulation
mode
2. Intensity
5. After the two minutes have passed,
will start to flash on the
display. To begin pumping the breast milk, press the button.
Use the / buttons to select a suction intensity that is com-
fortable for you. Stop using the pump once there is 180 ml of milk
in the bottle.
3. Start pumping
4. Intensity
6. If you want to switch back to stimulation mode, press the but-
ton. The stimulation and the two-minute timer will start from the
beginning.
The breast pump has a memory function, which recalls the
last programmed stimulation or pumping level when it is
switched on.
5. Back to stimulation mode
7. To switch off the breast pump, press the button.
