16
• When the measurement has been taken, the pressure dis-
sipates very quickly. The pulse, the systolic and diastolic
blood pressure are displayed.
• Now press memory keys
M1
or
M2
to select the required
user memory. If you do not select any user memory, the
measurement result is assigned for storage in the user
memory which was last used. The symbol
or
appears accord ingly in the display.
• Using the on/off button, switch off the blood pressure moni-
tor. The measurement result is then saved to the selected
user memory. If you forget to switch off the device, it
switches off automatically after approx. 3 minutes. Even
then, the result is still saved to the selected user memory.
Note:
Measuring can be cancelled at any time by pressing the
on/off button.
Wait at least 5 minutes before any new measurement!
6. Table for classification of blood pressure values (unit of measurement mmHg) for adults:
Range Systolic
Diastolic
Action
Hypotonia (degraded blood pressure)
lower than 105
lower than 60
Check with doctor
Normal range
between 105 and 120
between 60 and 80
Self check
Pre-hypertensive blood pressure range* between 120 and 140
between 80 and 90
Check with doctor
High blood pressure – degree I
between 140 and 160
between 90 and 100
Consult your doctor
High blood pressure – degree II
higher than 160
higher than 100
Consult your doctor
(*) Blood pressure range that might transfer to high blood pressure
Adapted from JNC 2003
7. Displaying and deleting measurements
Memory recall
You can recall stored results from the two user memories and
display averages.
• Press memory buttons
M1
or
M2
. First the average is dis-
played of all the results held in this user memory. This is
indicated by reading .
• Continue pressing the memory button to recall other individ-
ual measurement results – the first result to appear is that of
the most recent value measured. These individual values are
indicated by memory location numbers 1 to 30. After approx.
4 seconds, the date of the respective measurement result is
displayed and then the time after a further 4 seconds.
• Once 30 individual values are in the memory, the oldest value
is deleted in order to make room for the new measured value.
• Use the on/off button to turn off the device, or it will turn off
automatically after approx. 30 seconds.
Note:
You can also use the two user memories to save meas-
urement results separately, e.g. in the morning and evening.
Summary of Contents for BM 20
