Questions? 1-800-632-3379
Last Updated February 2018
Page 16 of 17
LYSON W229E
Operation:
Distribute frames evenly around the extractor to ensure a balanced load. Close lid and open honey
gate before starting extractor. Turn unit on with switch on right side of control box. Slowly increase
speed by pressing the “+” button. Allow to extract at l
ow speeds before gradually increasing the speed
as the honey extracts. Vary the speed as needed. If load becomes imbalanced, reduce the speed
and/or rearrange the frames. For quickest extraction, extract in a warm room (80-90+ degrees) with
warm honey supers.
Do not extract with the honey gate closed. The honey level will rise and interfere with the
rotation of the basket.
When finished, clean the extractor with soap and water.
Be sure to unplug the extractor first and
do not get the electronic components wet.
Do not fill the extractor with water as this can damage
the bearings. Rinse clean and allow to dry before placing extractor in storage.
SECTION 4: Construction of the 12
Frame Extractors
Honey extractors are made of acid-resistant, stainless steel. The side of drum is made of steel with a
thickness of 0.6mm, the cone-shaped bottom is made of steel with a thickness of 0.6mm. Legs are
made of steel coated with paint embossed using electrostatic painting. The machine is stable and
easy to dismantle.
Construction of basket
Radial basket made of acid-resistant stainless-steel rods with thickness of 2mm and 5mm. Basket is
embedded in mounted bearings
Electric drive
Power supply in this honey extractor is 120V
Cover
Transparent made of acrylic glass. It protects from the dangers of contact with a rotating basket and
helps to stay clean
Drain
Valve
Metal 1¼
Drum height (without drive)- 610 mm
Height of honey extractor with electric drive - 950mm (+220mm drive)
Weight (dia.500mm)
–
21 kg
Weight (dia.600mm)
–
25 kg