Questions? 1-800-632-3379
Last Updated February 2018
Page 12 of 17
LYSON W229E
13.
Identify the correct screws and washers to install the hinges on the plexiglass covers. Use the
long screws
and the
large washers
. You will need
three
plastic shims per hinge. Install the hinges
on plexiglass with three shims between the hinge and the plastic. Do
not
fully tighten the nuts yet.
Mount the handle on the cover with an extra hole.
14.
Install the covers on the top-bar.
The cover with the handle goes on the side opposite the
crank. This is the side you will load and unload frames.
Use
short screws
and
small washers
to
mount the hinges on the steel top bar. Align the cover and adjust hinge positions before tightening all
nuts. Do not overtighten as this may strip the screws. Be sure that the lid presses on the lid switch
when the lid is closed.