Page
2
of
5
User Manual
Parts Listing
Figure 1 - Complete Colorado Bee Vac
Figure 2 - Catch box
Assembly:
1. Slide the rubber coupling at one end of the hose over the round inlet of the blast gate.
2. Insert the wide end of the suction wand into the other end of the hose and tighten the hose
clamp.
3.
Before starting, open the blast gate “door” all the way.
4. Slide the metal tray in all the way in and lock into position with the latch.
5. Set the vacuum top on the catch box so that it is sitting flat and resting on the foam gasket.
6. Plug in power cord and you are ready to go.
Bypass valve
Blast gate
Hose (10’ standard)
Coupling and hose clamp
Vacuum top
Catch box
Suction wand
Metal tray
Latch
