9
5.
PREPARING THE WATER BOTTLE
Fill bottle with water and place in bottle holder so that the spout of the bottle is in the tank.
6.
ELECTRICAL CONNECTION
a.
Attach power cord to the receptacle in the rear of the machine.
b.
Plug machine into a standard power outlet (115Vac - 60 Hz current only).
WARNING
FOR YOUR SAFETY
all the metal parts of this machine are electrically grounded through a 3-
wire power supply cord and a 3-prong grounding type plug which must be plugged into a 3-wire
grounded type receptacle.
If you are not sure the electrical system in your building is properly grounded, call a licensed
electrician.
c.
When all connections have been made, turn on the power switch at the right front of machine.
The power light should be illuminated and indicates the machine is ready for operation.
7.
TOP HEATER SETTING
Finding the correct setting for the tape you are using is a matter of simple testing. Turn the
adjustment knob (clockwise) to the highest setting, then while using the machine, incrementally back
off the control to the lowest temperature setting that best meets your needs.
Water Bottle
Heater Knob
Top
Heater
