41
16.
Turn “ENTER/ESC” knob to clockwise for fifteen clicks,
the LCD Window would appear as follows:
Press “ENTER/ ESC” knob to adjust “MIC Mode” setting.
Press knob to confirm it.
SHORTCUT CONTROL
SETTING CONTROL:
The (1) EQ (2) DELAY (3) POLARITY (4)
GAIN (5) LIMITER and (6) X-OVER buttons are shortcut buttons
that can be used while in the MIC, EFFECT, MUSIC and
OUTPUT MODE. Additional settings can be accessed by
pressing the buttons continuously.
SYSTEM CONTROL:
(7) Back (8) System (9) Program
Adjusting PROGRAM Button
The DX-8000 mixer has 10 customizable mixer settings the
user can load, save, and erase from.
1.
Press PROGRAM
button, the LCD Window would
appear as follows:
Choose the data types first (1. User Data, 2. effects Data and
3. Factory Data). Then choose the operation type (Load,
Save, and Erase) and press knob to confirm it.
EQ
GAIN
BACK
DELAY
LIMITER
SYSTEM
POLARITY
X-OVER
PROGRAM
Boot Eff Mast Vol
100% Enabled
Range: 10%~Max Effect Master Volume
Range: Enable / Disabled
Press “ENTER/ ESC” knob to adjust “Boot Effect Master
Volume” setting. Press knob to confirm it.
12.
Turn “ENTER/ESC” knob to clockwise for eleven
clicks, the LCD Window would appear as follows:
Press “ENTER/ ESC” knob to adjust “Max Music Master
Volume” setting. Press knob to confirm it.
13.
Turn “ENTER/ESC” knob to clockwise for twelve
clicks, the LCD Window would appear as follows:
Press “ENTER/ ESC” knob to adjust “Boot Music Master
Volume” setting. Press knob to confirm it.
14.
Turn “ENTER/ESC” knob to clockwise for thirteen
clicks, the LCD Window would appear as follows:
Press “ENTER/ ESC” knob to adjust “Sub Ch LPF Limits”
setting. Press knob to confirm it.
15.
Turn “ENTER/ESC” knob to clockwise for fourteen
clicks, the LCD Window would appear as follows:
Press “ENTER/ ESC” knob to adjust “Sub Ch LPF Limits”
setting. Press knob to confirm it.
System Setup
12. Max Mus M Vol
Max Mus Mast Vol
100%
Range: 10%~100%
System Setup
13. Boot Mus M Vol
Boot MIC Mast Vol
100% Enabled
Range: 10%~Max Mus Master Volume
Range: Enable / Disabled
System Setup
14. Sub LPF Limits
Sub Ch LPF Limits
155 Hz Enabled
Range: 20Hz~20000Hz
Range: Enable / Disabled
Data Type Choice
1. User Data
User Data
—
›
Load
You have the option to Load, Save,
and Erase from the 10 settings.
Eff Data
—
›
Load
You have the option to Load, Save,
and Erase from the 10 settings.
Plant Data
—
›
Load
You have the option to Load, Save,
and Erase from the 10 settings.
System Setup
15. Sub MIC Regard
Sub Vol Decay
-6 dB
Range: -80dB~0dB
System Setup
16. MIC Mode Set
MIC Mode Set
Singing
Range: Singing mode / Standard mode
Summary of Contents for DX-8000
Page 50: ...50 ...