LP (LIQUID PROPANE) GAS SUPPLY CONNECTION
__
•
Always confirm that the burner control knob is in the “OFF” position before connecting
the gas supply.
•
Do not obstruct the flow of combustion air and ventilation air to the fire table.
•
Ensure that there is no debris caught in the head of the gas cylinder
and head of the regulator valve.
To Connect:
•
Insert the nipple of the valve coupling into the cylinder valve and
tighten the black coupling nut by turning it clockwise with one hand
while holding the regulator with the other hand. (See diagram)
Hand tighten only.
•
Always confirm that the cylinder valve is in the
“OFF” position before disconnecting the gas
supply.
To Disconnect:
•
Hold the regulator with the one hand and loosen
the black coupling nut by turning it counter-
clockwise with the other hand.
IMPORTANT
•
Disconnect the propane cylinder from the regulator valve when the fire table is not in
use.
SELECTING A LOCATION
Always place this outdoor fire table on a hard, level,
non-combustible surface such as concrete, rock or
stone.
Minimum Clearance from Unit to Combustible
Materials
72”(182.9cm) from the top; 48” (121.9 cm) from all
sides and back. Do not locate this fire table under
any overhead enclosure. Position the fire table so
that you have easy access to the control knob.
VISUAL CHECK
Prior to each use, check the hose and valve for excessive wear, abrasions or any
damage.
7
