12
Assembly Instructions
9.
Now, go back and tighten all Cam Locks and Screws. Make sure that all the parts are tight and there are
no gaps between the parts. This will help keep the unit square.
10.
Unfold the Back Panel (M) and position it onto the back edges of the assembly. Make sure that the
overlaps on the panels are even all the way
around.
Secure the Back Panel (M) in place with the 15 mm
Washer Head Screws (6).
NOTE
: We recommend attaching back panel with the screws at the corners first.
M3.5 x 15 mm
Washer Head
Screw
(32 used in this step)
⑥
UP
M
M
J
C
6
