6
INSTALLATION
The cabinet is supplied with a hanging bar to mount the cabinet onto the wall. At
the back of the cabinet there is a corresponding bar which is designed to slot onto
the hanging bar.
1.
Choose the desired position of the cabinet, and from that determine the
required position of the hanging bar.
2.
Hold the hanging bar in position, using a spirit level to ensure it is level.
3.
Use a pencil to mark the position of the 3 holes on the wall.
4.
Place the hanging bar to one side, and drill the holes with a suitable drill bit.
5.
Insert wall plugs into the holes, ensuring they are flush to the wall.
6.
Place the hanging bar onto the wall, lining up the 3 holes with the wall plugs.
7.
Secure the hanging bar to the wall using the supplied screws.
8.
You will now be able to hang the cabinet. Carefully lower the cabinet onto the
hanging bar, ensuring that is secure and will not slide.
9.
Open the cabinet door and mark the wall with a pencil through the security
hole on the back panel.
10.
Remove the cabinet, drill the hole then place a wall plug into the hole you
have just drilled.
11.
Hang your cabinet back up onto the hanging bar and ensure that the in the
cabinet is lined up with the wall plug.
12.
The cabinet should now be connected to a suitable fused spur following
current regulations and guidance. We would advise for this to be situated
directly behind the cabinet below the hanging bar. When connecting ensure
that enough cable is left to allow the cabinet to be safely removed from the
hanging bar.
13.
Secure the cabinet to the wall using a screw through the security hole and
into the wall plug you previously installed.