Operating
Bettcher Industries, Inc.
Whizard® Power Knife Manual
Instructions
October 21, 2020
Page 10
8.1 Headpiece Assembly (continued)
Steeling the Blade
Hold Power Knife in your operating
hand and START tool.
Holding steeling rod horizontal with
your other hand, lay knife flat on the
steel and move it
lightly
back and forth
across steel several times. Next place
the end of the steeling rod down
through the notch in the depth gauge
and lightly touch the inside surface of
the blade to `raise' the edge for better
cutting. The notch helps to hold the
steel at the proper angle to the blade
edge to prevent "rounding off" or
rolling the edge.
Clean tool thoroughly after sharpening.
CAUTION:
Sharp Blade Cut Hazard
