background image

July 28, 2004 

The Fast and the Furious Drift • Copyright 2007 • Raw Thrills Inc • All rights reserved

            

  

37

Set Default Adjustments Menu 

From the 

Utilities Menu

, select 

Default Adjustment 

and enter. Performing Default Adjustment setting will restore 

game adjustments back to its manufacturer recommended settings. The game will need to be re-calibrated. Press 
Start to Select. Press Tunes or Service to Exit.

 

 

 

 
 

Set Default Adjustments Menu 

From the 

Utilities Menu

, select 

Reset Link System Config  

and enter. This utility allows the communication 

between linked games to be re-established due to a possible fault other than hardware. Check all network related 
hardware (cables, router) and make sure that they are connected and then power cycle the games. Press Start to 
Select. Press Tunes or Service to Exit.

 

 

 

Press /- or View 1/3 to 
Navigate 
Press Test or Start to Select 

Confirmation: 
 

Select “Yes” to carry 
out this utility. 
 
Select “Cancel” to 
return to the previous 
menu. 
 
This will cause the Link 
System configuration to 
be reset. The Link 
System will not function 
until the machine 
reboots. 

 

REALLY Reset Link 
System Config?

 

 
Yes (All Linked Games) 
Yes (This Game Only) 
 

Cancel 
 

Press /- or View 1/3 to Navigate 
Press Test or Start to Select 
Press Service or Tunes to Exit 

Utilities 
 

Please note the 
following: 
 
Setting default 
adjustments or 
performing a factory 
restore will require 
calibration 
afterwards. 
 
A factory restore will 
perform all the resets 
listed at the left, 
clearing credits, 
audits, high scores, 
player data. 

 

Really Set Default Adjustments?

 

 
Yes 
No 
 

Cancel 
 

 

Summary of Contents for Fast and the Furious Drift

















































Reviews: