< BALL MADNESS >
Manual
V1.1
16
3.2.
Test instructions
3.2.1.
Setting Panel Description
■UP / TEST: Click in the standby state to enter the test program; Press the flip page in the test
program
■DOWN / SERVICE
：
On standby, click the free game once; Click on the next page in the test
program
■ENTER/CLEAN
：
Tap in the test program to select or ENTER, Hold 3 seconds to clean the
balls by standby mode.
■REPAIR
：
Tap it after feeding the tickets.
3.2.2.
Display screen instruction during testing mode
GAME MODE
、
PLAY TIME INSTRUCTIION
SOFT - NOMAL - HARD (Mode cycle)
*Details refer 3.2.3
Testing of Bottom Ball collect door
OPEN/CLOSE
Press“ENTER”button, the BALL COLLECT
DOOR keep open and close, and Display screen
will show“OPEN”“CLOSE” to check the sensor.
ON means be detected, OFF means haven’t been
detected.
