
Betrue Shower Bluetooth Speaker BTS-05C CSR BC-8 User Manual 20130930r0_draft final
8.
To turn “OFF” the Bluetooth Speaker, press and hold
button for 3 seconds, a ring sound will beeps
then the device will turn OFF after the ring tone beeps.
Note:
In some circumstances, the Bluetooth connection may break / disconnected; such as some strong interference,
beyond the connection distance or object moving in between both Bluetooth devices. However, most of devices
can be reconnected in some seconds automatically, but in experience some of device may need to reconnect it
by using the Bluetooth device’s list menu manually.
Besides, since there have many Bluetooth versions could be installed into difference type/brand of PCs, and
also connect methods will have differences. If you cannot connect your Bluetooth devices, please install with
updated Bluetooth driver into your PC or contact your dealer’s help desk for enquiry.
F.
Disconnected from paired device
1.
To disconnect with paired device and for better result, turn OFF the Bluetooth Speaker by power OFF
directly.
2.
Or, you can choose disconnect from the Bluetooth device’s list by the paired device, however, most
devices will go back to reconnection mode in seconds. Means the Bluetooth Speaker will again
reconnected with the paired device with in seconds automatically. So, turn OFF the Bluetooth function
from the paired device in this case if you want.
G.
Switch to Bluetooth searching mode for new device
Before does this, we recommended you to turn OFF the Bluetooth function from previous paired device
firstly to avoid unforeseen connection issue.
1.
Make sure that the Bluetooth Speaker is in power ON mode.
2.
Press and hold the
button for 3 seconds to switch the Bluetooth Speaker into Bluetooth Searching /
Pairing from current mode.
3.
Then, activate the new wanted device’s Bluetooth function for searching and pairing.
(Same method as 4 –
7 of item 2.E. mentioned above)
Note:
The device is keep using battery energy if it is in power ON mode, Turn OFF the Bluetooth Speaker by the
power button if you do not use the device for a while. Besides, the Bluetooth speaker will be turned to OFF
automatically if it is in idle and without Bluetooth connection in 5 minutes.
H.
Bluetooth Device Control Function:
On your Bluetooth Device:
1.
Switch to music play mode and choose music to start the play, select music by using “
/
”
button/icon, Play/Pause the playing music by using “
“ button/icon and adjust the volume level by
using device’s volume control “
Down / Up
” button/icon on your Bluetooth device. (refer to your device
user’s manual when necessary)
On Bluetooth Speaker:
2.
Press the “
/
” button to change to previous / next music file.
3.
Press or pressing the
“
/
”
button to adjust the volume level. However, beeps will hear when the