Betrue Shower Bluetooth Speaker BTS-05C CSR BC-8 User Manual 20130930r0_draft final
D.
Connection and Charging:
1.
Open the rubber seals and connects the Bluetooth Speaker’s Micro USB connector with the Computer’s
USB port through USB cable
(supplied)
.
2.
The charging LED turns ON in red light. (make sure that the computer is turned ON)
3.
The charging LED will switch to green light when it’s fully changed.
4.
Disconnect the USB cable when it is done.
Charging LED Function
Item Mode
Light Status
1.
No DC power input:
LED light OFF
2.
In Charging:
Light On in red color
3.
Charge Completed:
Light color from red switch to green
E.
Turn ON/OFF & Play from Bluetooth device:
1.
Press and hold
button for 3 seconds to turn
“ON”
the Bluetooth speaker. The ring tone will beeps from
speaker and the mode LED indicator will turn ON and light blue with blinking (2 seconds once). It is in
Bluetooth re-connect mode.
2.
Before the Bluetooth Speaker can re-connect with the paired mobile device(s) automatically, you need go
through the first time Bluetooth pairing process with your desired device(s).
3.
For first time Bluetooth pairing process; in power ON mode, press and hold
button for 3 seconds to
switch to Bluetooth Searching / Pairing mode. The ring tone will beeps and the mode LED indicator blue
light will blinking fast (half second once). It is in Bluetooth Searching / Pairing mode.
Power & Mode Indicator Function:
Item
Mode
Description
Light Status
1.
Power OFF
Light OFF.
2.
Power ON
At Bluetooth Re-connect mode
Blue light On & blinking; 2 seconds once
At Bluetooth Re-connect/Paired mode
At Bluetooth searching mode:
Blue light On & blinking; half second once.
4.
Then, activate the Bluetooth function in your mobile Bluetooth device (such as Mobile Phone, MID or
Personal Computer); the mobile device will enter to Bluetooth searching mode automatically, if not, tap
the relate selection to manually enter to searching mode.
(refer to your mobile device’s manual when
necessary)
5.
Your mobile Bluetooth device should show
“Qshower”
in list, and then select it for pairing. Waiting for
some seconds and you will see connected message as shown on your mobile Bluetooth device.
6.
For some mobile Bluetooth devices, you may need to input
“0000”
as pairing password. Once devices
paired, the Bluetooth Speaker will beeps twice and the mode LED stays steadily ON with flashing in 2
seconds once, the device is in paired. (pairing need time will depend on the difference type / brand of
device be used)
7.
Now, you can start to music play on your Bluetooth device when the device is in paired and show
connected.
(If not, select / tap the relate menu and choose “connect” to connect the Bluetooth speaker
manually. It’s depended on your Bluetooth device version and designed function.)