Betec IceAge II Instruction Manual Download Page 5

Maintenance 
 

1.   Always   keep   the   unit   stand   still   at   up-­‐right   position   while   moving   to   avoid   causing   damage   to   the   
compressor   of   the   unit.   
   
2.   Plug   the   unit   into   a   power   outlet   alone.   Make   sure   your   electricity   supply   is   187-­‐242V~50Hz,   the   
current   is   10A.   
   
3.   To   disconnect   the   power,   grip   the   plug   and   pull   it   from   the   wall   outlet.   Never   drag   the   cord.   If   the   
power   cord   is   damaged,   bring   it   to   the   service   centre   for   replacement.   
   
4.   The   unit   should   be   placed   vertically.   Do   not   place   the   unit   near   flammable   items   or   fire   source.   
Keep   at   least   20cm   distance   from   the   surroundings   for   better   ventilation   and   operation.   
   
5.   Initially   when   switching   “On”   the   unit,   it   will   takes   sometimes   before   water   is   cooling   down   to   zero   
degree.   Duration   of   ice   cube   making   will   be   prolonged   if   adding   more   water.   
   
6.   If   the   water   level   is   lower   than   the   minimum   water   level   of   the   Water   Tank,   the   “Lack   Water”   
indicator   will   light,   indicating   manual   water   filling   is   required.   If   using   external   water   inlet   pipe   for   
water   supply,   the   “Lack   Water”   indicator   will   blink,   indicating   water   filling   starts   automatically.   
   
7.   Use   only   drinking   water   to   make   the   ice   cube.   Never   use   dirty   water   as   it   may   damage   your   health.   
Clean   the   unit   frequently   after   each   usage.   
   
8.   Clean   the   water   ejector   if   water   is   not   flowing   well.   
   
9.   Install   the   “Ice   Cube   Tray”   in   correct   position   to   avoid   touching   the   Ice   Shovel   
   
10.   If   no   water   is   adding   to   the   unit   when   the   “Lack   water”   indicator   light   up,   the   unit   will   stops   running   
automatically.   
   
11.   Always   keep   the   sensors   clean   from   rust   for   better   performance.   
   
12.   Do   not   open   the   Lip   Cover   of   the   unit   during   running   as   it   may   affects   the   ice   cubes   making   performance.   
   
13.   Unplug   the   unit   from   the   power   outlet   and   remove   all   ice   cubes   before   cleaning.   Use   a   dilute   
solution   of   water   and   vinegar   to   clean   the   interior   of   the   ice   maker,   and   then   rinse   it   with   drinking   
water   thoroughly.   Do   not   rinse   internal   components   of   this   unit.   Do   not   use   gasoline   to   wash   this   
unit.   
   
14.   Remove   the   Drain   Plug   from   the   unit   to   drain   the   remaining   water   from   the   water   tank   and   let   it   
clean   and   dry   when   the   unit   will   not   be   used   for   a   long   period.   
   
15.   When   using   the   external   water   pipe   for   water   supply,   the   unit   will   stops   running   if   there   are   no   
water   supply   coming   from   the   pipe.   

Summary of Contents for IceAge II








Reviews: