BETCO xt3-27, Operator'S Manual

Page: 18 / 36

x
Connect the hose to a dedicated hose bibb.
x
After installing, purge the air out of the hose. Purging is necessary after the
Millennium SPW™ system is installed and each time that the system is
disconnected and reconnected to the hose bibb. See included Purge Procedure
instructions.
PURGING IS REQUIRED BEFORE FIRST USE, OR IF HOSE
ASSEMBLY HAS BEEN REINSTALLED SINCE LAST USE
(See next page and separate manual)
x
REFILL BATTERIES AFTER THEY HAVE BEEN CHARGED. One watering per
week is usuallyenough. Firmly mate the quick coupler. When the connection is
made the red balls in the Flow Indicator will start rotating indicating water is flowing
into the battery cells.
x
After the Flow Indicator balls stop rotating, immediately disconnect by
x
pushing the CPC button in and pulling the male Quick Coupler out.
x
Put the dust cover back on the battery's male Quick Coupler.
x
Store hose out of traffic area when not in use.
WATERING SYSTEM INSTRUCTIONS
FOR 6 VOLT WET CELL BATTERIES
PLEASE REFER TO SEPARATE
“PRO-FILL ON-BOARD WATERING SYSTEM”
MANUAL FOR DETAILED INFORMATION
BATTERY FILL INSTRUCTIONS
Connect Quick Coupler
to connector on machine
BETCO CORP. 6/22/07 Page 18 XT3 BATTERY BURNISHER