BETCO PowerUp 14, Operator And Parts Manual

Page: 7 / 16

7
4. Turn power switch on and operate in low mode for daily
cleaning.
5. Depress the high / low switch if more power is required
for heavier debris.
6. STARTING UP THE BRUSH
To operate: Use your foot to depress the handle release pedal (A) and tip
rearward the vacuum handle at the same time.
7. CHECKING THE BRUSH
The brush control device continually monitors the brush operation. The
following indicator lights could be observed and mean the following:
• Green light: the brush is operating correctly.
• Red light: the brush is blocked or subject to excessive stresses. When
the Red light is illuminated turn off the cleaner, unplug the vacuum from
the electrical outlet and clear the blockage.
• Simultaneous red and green lights: the brush roller is worn out and
must replaced.
8. FILTER-FULL INDICATOR
If the Full Bag Indicator turns red, check the following:
a) Collection Filter Bag. If it is full replace it with a new, unused bag.
b) Brush Roller. If obstructed and locked clear the blockage.
c) Vacuum Hose. If it is blocked, clear the blockage.
d) Hepa Filter. If blocked, replace the Hepa filter.
MACHINE PREPARATION AND OPERATION
A
5 4