11.3.2 ASSEMBLY
1)
Put the floor wiper back by pushing it into its guides.
2)
Insert the lateral lock in the special swallow tailed slide of the squeegee support and press it down.
N.B. refit the squeegees back in the same position.
11.4 BRUSH
The brush ensures removal of dirt thanks to its mechanical action on the floor.
If you are using the machine in particularly dirty environments, the self-cleaning system of the brushes may not be
sufficient. In this event, we recommend you to remove the brush and wash it by hand.
11.4.1 DISASSEMBLY
1)
Remove the front bonnet ( 1 FIG. 6) by grasping its side and pulling outward.
2)
Turn the brush (3 FIG. 6) so that its coupling lever (2 FIG. 6), located on its right hand side, is facing
upwards.
3)
Push the roll coupling lever axially (2 FIG. 6) in such a way as to release it and, at the same time, press
the roll down and pull it out crosswise.
11.4.2 ASSEMBLY (FIG. 7)
To refit the brush, carry out the above operations in reverse order.
7
Fig. 6
Fig. 7
