SHVE, SGVE LPWAN 868 VEGA / User Manual
25
3.6 “VEGA SHVE/SGVE V.2” TAB
3.6.1 BASIC DESCRIPTION
“Vega SHVE/SGVE v.2” tab contains the special settings and parameters of the connected device
(fig. 26).
Figure 26 — “Vega SHVE/SGVE v.2” tab
3.6.2 FIELDS DESCRIPTION
3.6.2.1 «Current state» – displays the current parameters of the device (temperature, battery
charge, meter diameter, current readings).
3.6.2.2 «Data transmission settings» – a group of parameters that allows you to configure the
collection and transmission periods, and the time zone for the internal clock of the modem will be set
which.
Transmission (communication) period may be equal to 1, 6, 12 and 24 hours.
Data collection period may be equal to 1, 6, 12 and 24 hours.
3.6.2.3 Enable/disable the "Send an alarm when a leak and a break is detected" function. The
feature is enabled by default.
3.6.2.4 Enable/disable the "Lock the display in case of detection an external magnetic field"
function. The feature is disabled by default.
3.6.2.5 «Commands» – displays the “Send Password” command.