19
28/10/2019 – Nylofor
®
- Installation manual
2. Installation of the fencing systems
2.
Installation of posts & panels
2.
Bekafix
-
Installation principle: Bekafix posts are installed
according to the ‘post-panel-post’ system
ATTACHMENT OF THE CLAMPS
- Start by attaching one panel to a post on each side
- Hook the panel into the hook caps to help hang it up
- To attach the panel the panel is lifted from the hook cap and
a polyamide or metal fixator is attached below the upper nose,
so that once attached the panel no longer rests on the hook
cap. A second fixator is attached above the lower nose of the
panel. In between, a few additional fixators are placed. The
panel is attached using fixators and the Bekafix tong.
(Fastening with the tong is done differently depending on the
fixator type - see illustrations below). Position the fixators just
below a horizontal wire whenever possible. The lower fixator
should be located just above the lower horizontal wire.
- For extra security you can bolt the fixators onto the post.
Attach at least 1 clamp per panel side
1
Summary of Contents for Nylofor Bekafix
Page 1: ...Securing What Matters Nylofor Installation manual EN ...
Page 41: ......
