4
ADJUSTMENTS
66
GB
NOTE
Failure to successfully complete the above procedure can be the result of an improp-
erly sized idling jet.
a) If the mixture adjusting screw is turned until it stops and no changes in the idle
speed are observed, a smaller idling jet is required.
b) If the engine stalls when the adjusting screw is still two turns open, a larger idling
jet is needed.
Naturally, after replacing the jet the adjusting procedure will have to be restarted
from the beginning.
•
Turn the adjusting knob until you obtain the desired idle speed.
•
The idle speed will have to be adjusted again in case of marked changes in the
outside temperature and riding altitude.
Summary of Contents for RR 350
Page 34: ...34 GB ...